Skip to product information
1 of 7

NEP Audio

Router Bits, 1/4 & 1/2 Inch Shank

Regular price $14.00 USD
Regular price $21.00 USD Sale price $14.00 USD
Sale Sold out
Shipping calculated at checkout.

Cutting Edge Length

Cutting Edge Diameter

We will try to keep these in stock, but many times these items are being drop shipped to our facility for inspection. We will then send the product on to you. This could delay the time it takes to receive the items by 5 days to 2 weeks. We have decided it was best to make sure it checks out OK before having it go out to you. Contact us for ETAs before or after purchase, because we always have them coming in.


  • ✔ Carbide Tipped Straight Plunge High Production: 1/4'' cutting diameter x 7/9 inch Cutting Height x 1/4'' Shank

  • ✔ Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Open-flute design promotes rapid chip clearance, necessary for high feed rates.

  • ✔ Cuts all composition materials, plywoods, hardwoods, and softwoods

  • ✔ High quality carbide tipped provide superior wear resistance and sharp edges.

  • ✔ In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth




     Tool usage and precautions

1. In order to prevent the cutter from being twisted due to excessive pressure, all cutters are designed to rotate clockwise.

2. When the tool is finished, it passes the balance test to ensure that there is no doubt of radial jump. In order to ensure that the tool has no swing and jump during use, please pay attention to selecting the appropriate mechanical equipment and excellent chuck.

3. The appropriate size of the collet must be selected. If it is found that the collet is not round enough or worn, it will cause the collet to not clamp the tool properly and correctly. Please replace the intact collet with standard specifications immediately.

4. The installation of the tool handle should be in accordance with the EU regulations. For example, the clamping depth of the shank diameter of 12.7mm must reach 24mm to maintain the pressure bearing range of the tool handle.

5. When the tool is blunt, please replace it with a new one, and do not continue to use it to avoid tool breakage and work-related injuries.

6. When using a tool, please choose a tool with a blade length greater than that of the workpiece. For example, if you want to mill a groove with a depth of 12.7mm, please choose a tool with a blade length of 25.4mm, and avoid using a tool with a blade length equal to or less than 12.7mm.

        Suggestion of milling cutter speed

Tool diameter                                                    Speed

1”(25.4mm)                                                      32000RPM

1-1/4”~2”(30-50mm)                                       18000RPM

2-1/4”~2-1/2”(55-65mm)                                16000RPM

3”~3-1/2”(75-90mm)                                       12000RPM


  • Shipping

    We offer discounted shipping rates which can be calculated during checkout

  • Returns

    You may return an item in new condition with no questions asked for 13 days after confirmed delivery.